The rule that less is more can be applied in many cases. This is no different in the case of bathroom fittings. While it is not worth saving on quality, the space should be cluttered as little as possible. A solution that saves space and ensures safe and reliable bath filling and drainage is the kielle bath waste set, which uses overflow fillling.

No more bruising from the bath

The unpleasant and very painful injuries that all of us have undoubtedly suffered are those that are caused by our bathtub drain. As children we have more than once scraped our backs against it, as adults it has caused a few bruises on our legs and arms. The solution here is to fill the bath with an overflow filler, offered by the kielle bath waste set. In addition to the practical side, you'll enhance the visual aesthetics of the room, lightening it up.

Safe water handling

The overflow bath filler, waste and trap system is not only used to fill the bath with water, but also to safely drain the water away from the bath once bathing is finished. It also protects the bath from overflowing. It is designed for standard size baths with a 52 mm diameter drain outlet. The total length of the bath trap is 57 cm.

Convenient filling of the bathtub

The filler is equipped with a Neopert aerator, which can be easily accessed for easy replacement. The control spindle is made of stainless steel. Importantly, the water does not run down the side of the tub, so you don't have to worry about stains that the water might leave behind. 

Odourless beauty 

The advantage of the system is the minimum space required. Only the control knob is visible. You retain the subtlety and visual cleanliness of the space. Last but not least, you will appreciate the easy installation using three stainless steel screws. A great advantage is the odour trap with swivel elbow. The waste is closed by means of bowden control. The flexible overflow tubing is also included.

Complete bath waste set

• for filling the bath using overflow filler
• for water drainage from the bath
• for standard size bathtubs
• for bathtubs with drain outlet Ø52 mm

Properties

• bath overflow filler, waste and trap system
• Neoperl aerator – easy to access and replace if needed
• stainless steel control shaft 
• water does not flow down the side of the bathtub and does not leave any stains
• takes up minimal bathtub space – only the control knob is visible
• easy installation with three stainless steel screws
• odour trap with swivel elbow
• bowden waste control
• flexible overflow pipe
• side G1/2" fitting for filling of pre-mixed water
• length of bath trap 570 mm

Technical features

• odour trap 50 mm
• flow rate 48,6 l/min
• overflow flow rate 33,6 l/min
• 588 Pa pressure resistance of odour trap
• 95 °C thermal resistance

Scope of supply

• waste trap body with overflow
• chrome-plated plastic control knob
• chrome-plated plastic plug
• chrome-plated brass waste grid strainer
• polypropylene odour trap, thermally and chemically resistant, longitudinally welded
• assembly kit
• adjustable gasket